SX200 is a high performance, drained, lightweight commercial aluminium window system with an excellent record in service. The range has now been developed to include fixed-lights, top-hung, side-hung, pivot and tilt-turn styles, either internally or externally beaded. A variety of mullions and transoms allowing large composite windows to be fabricated, completes the range. Maximum sizes, together with other features, are included in the following table.     Top-hung Side-hung Side-hung hinged Horizontal Pivot Open in & Tilt Turn Maximum Width 1200 600 900 1200 1000 Maximum Height 1500 1200 1500 1500 1500 Max Perimeter 5000 3400 4800 2000 5000 Internal Beading Multi-point Locking Note: This table is intended for general guidance - maximum sizes can be amended by the inclusion of additional locking points etc. If in doubt, please consult Anglia Fixing. Construction SX200 windows are constructed using mitred and mechanically crimped corners with support chevrons and cleats to ensure accurate alignment. Integral transoms and mullions are mechanically fixed and sealed to outer frames. All necessary crimp tooling is available from Anglia Fixing to ensure the correct level of quality in fabrication. Glazing SX200 is a drained dry glazed system utilising captive and wedge gaskets. All glazing to be in accordance with BS6262. Single glazing from 4mm to 11mm and double-glazing up to 28mm can be installed. Performance All SX aluminium windows types have been tested and classified in accordance with BS6375: Part 1: 1989. Test reports are available. Drawings Select the Drawings button below to view drawings of typical arrangements of Subframe Window Wall, or Back to return to the main Aluminium Window Systems page.