SW400 is a high performance heavier duty aluminium window suite capable of undertaking a wide variety of large and small commercial projects. Fully drained, either non-thermal or thermally broken, the range has been extensively developed and tested and now includes the following window types: fixed-light, top-hung, side-hung/open out, side-hung/open in, horizontal pivot, vertical pivot, overswing and tilt-turn.
A range of mullions and transoms, allowing large composite windows to be fabricated, completes the range. Maximum sizes, beading alternatives and multi-point locking for the varying window types are summarised in the following chart. |
| Maximum Width | 1200 | 1000 | 1200 | 1200 | 1500 | 1200 |
|---|
| Maximum Height | 1600 | 1500 | 1600 | 1500 | 1500 | 1600 |
|---|
| Max Perimeter | 5200 | 4800 | 5200 | 5000 | 5000 | 5000 |
|---|
| Internal Beading |  | | | | | |
|---|
| Multipoint Locking | | | | | | |
|---|
Note: This table is intended for general guidance - maximum sizes can be amended by the inclusion of additional locking points etc. If in doubt, please consult Anglia Fixing.  Construction
SW400 aluminium windows are constructed using mitred and mechanically crimped corners with support chevrons and cleats to ensure accurate alignment. Integral transoms and mullions are mechanically fixed and sealed into the outer frames. All necessary crimp tooling is available from Anglia Fixing to ensure the correct level of quality in fabrication. Glazing SW400 is a drained and dry glazed system utilising captive and wedge gaskets and single glazing to 12mm and double-glazing to 28mm can be installed. All glazing should be in accordance with BS6262. Performance All SW400 Aluminium Windows types have been tested and classified in accordance with BS6375: Part 1: 1989. Test reports are available. Drawings Two sets of drawings showing typical arrangements of SW400 series aluminium windows are available as follows: The Back button will return you to the Aluminium Window Systems page. 
| 
