Anglia Fixing Aluminium SCW curtain wall is a proven, cost effective solution for low to mid-rise applications. Developed to provide a high quality answer to many fenestration requirements, it offers total flexibility in specification. Appearance Anglia Fixing Curtain Wall can be either single or double glazed for improved thermal and acoustic performance. With a 50mm wide face dimension, the system offers a range of mullion depths to cater for differing structural conditions. Complementary sections for sloped glazing and a range of external caps to vary the finished appearance are available. Construction Anglia Fixing Aluminium Curtain Wall uses a box and plate format for factory frame assembly using mechanical methods at butt joints. Assembly uses stainless steel or plated self-tapping screws into integral screw ports extruded into the body of the sections, directly through square cut adjoining component parts. Vertical sections are designed to run through. This enables individual panels to be made separately, easing the problems associated with handling and transporting large or multi-panel frames when fully assembled. The system may be glazed using dual gaskets or a combination of tape and gasket to suit individual performance requirements.  Performance
Anglia Fixing Aluminium Curtain Wall is a thermally-broken, compartment drained product which offers performance characteristics in lie with the highest requirements of the industry. When tested in accordance with the procedures laid down in BS5368: Parts 1, 2 & 3, the product achieved the following classification for weather resistance as defined in BS6375: 1989. Air permeability, 600Pa. Watertightness, 600Pa. Wind resistance, 2400Pa. Glazing Anglia Fixing Aluminium Curtain Wall is designed to accommodate various glazing options from 6 to 10mm for single glazing and up to 24mm for double glazing. Glazing must satisfy safety recommendations and withstand the calculated design wind pressure for different types of location. All glazing must comply with BS6262: Part 1. Finishes All Anglia Fixing Aluminium Curtain Wall systems are available in mill finish for final finishing by others or may be supplied in a full range of polyester powder or anodised finishes. Technical Support Anglia Fixing provide a design, installation and glazing service to to Specifiers. Our technical support department can also provide a comprehensive technical manual and standard drawings, as hard copy or on disk. Drawings Two sets of drawings of typical arrangements are available: 
| 
