Steel Products

Crittall™ Window Homelight™ Window Range

Homelight™ 'N' and 'Z' Range Casements

Dimensions & Reference Numbers:

Available in lengths: 279mm, 508mm, 628mm, 997mm, 1237mm, 1486mm, 1846mm, 1994mm

HEIGHT	LENGTH
	279mm	PREFIX 'N' = 508mm    PREFIX 'ZN' = 628mm
292mm		NG1 ZNG1	NG5 ZNG5
457mm		NH1 ZNH1	NH5 ZNH5
628mm	NE6F	NE1 ZNE1	NE5 ZNE5	NES1 ZNES1	NL1	NE5F ZNE5F
923mm	NC6F	NC1 ZNC1	NC5 ZNC5	NC5F ZNC5F		ZNC5H
1067mm		NC01 ZNC01	NC05 ZNC05	NC05F ZNC05F
1218mm	ND6F	ND1 ZND1	ND5 ZND5	ND5F ZND5F		ZND5E
1513mm		NDV1S * ZNDV1S *	NDV5 ZNDV5
2056mm	NA6 *		NA5 * ZNA5 *			NA15 * (761mm)
292mm						NG15F *

* Not available in Homelight™ double glaze construction.

HEIGHT	LENGTH
	PREFIX 'N' = 997mm    PREFIX 'ZN' = 1237mm
292mm	NG2 ZNG2			NG13 ZNG13	NG13G ZNG13G
457mm	NH2 ZNH2			NH13 ZNH13	NH13E ZNH13H
628mm	NE2 ZNE2	NES2 ZNES2		NE13 ZNE13	NE13E ZNE13E
923mm	NC2 ZNC2	NC2F ZNC2F	NC7 ZNC7	NC13 ZNC13	NC13C ZNC13C	NC13F ZNC13F	NC13H ZNC13H	ZNC2V
1067mm	NCO2 ZNCO2	NCO2F ZNCO2F	NCO7 ZNCO7	NCO13 ZNCO13	NCO13CO ZNCO13O	NCO13F ZNCO13F		ZNCO2V
1218mm	ND2 ZND2	ND2F ZND2F	ND7 ZND7	ND13 ZND13		ND13F ZND13F	ND13E ZND13E	ZND2V
1513mm		NDV2FSB * ZNDV2FSB *		NDV13 ZNDV13		NDV13F ZNDV13F		ZNDV2V
2056mm	NA13F *	NA2 *	NA25 *	ZNA25 * (1143mm)
292mm			NG25F

* Not available in Homelight™ double glaze construction.

HEIGHT	LENGTH
	PREFIX 'N' = 1486mm    PREFIX 'ZN' = 1846mm					1994mm
292mm		NG4 ZNG4			NG14 ZNG14
457mm		NH4 ZNH4			NH14 ZNH14
628mm	NE3	NE4 ZNE4			NE14 ZNE14
923mm	NC4F ZNC4F	NC4 ZNC4	NC10 ZNC10	NC10F ZNC10F	NC14 ZNC14	NC11F
1067mm	NCO4F ZNCO4F	NCO4 ZNCO4	NCO10 ZNCO10	NCO10F ZNCO10F	NCO14 ZNCO14	NCO11F
1218mm	ND4F ZND4F	ND4 ZND4	ND10 ZND10	ND10F ZND10F	ND14 * ZND14 *	ND11F
1513mm	NDV4FSB * ZNDV4FSB *				NDV14 * ZNDV14 *	NDV11FSB *

* Not available in Homelight™ double glaze construction.

Notes:

These are outside elevations. Where windows can be handed, left hand elevations are shown.

Except where marked by asterisk above, all window are available in Homelight™ double glaze construction. Use the suffix 'DG' after the type reference (e.g. ZNC2DG).

Some of the illustrations are drawn in 'N' range proportions; some are drawn in 'Z' range proportions. The type reference printed immediately under the illustrations indicates which is shown. In most cases both 'N' and 'Z' sizes are available.

Where the letter ‘A’ appears within an illustration, it is recommended that an adjustable Trickle ventilator should be specified to provide secure, weather-tight trickle-ventilation at the head of the pane. Trickle ventilators can be fitted in any pane in a ‘N’ or 'Z' type window 508mm or more in width.

Note that safety glass may be required in certain panes depending on sill height (see BS6262), so 'FSB' (full sublight bar) windows could be more economical to install.

Top hung fanlights in windows suffixed 'F' and 'V' are 306mm and 250mm high respectively. The minimum size of inner or outer frame for special manufacture of single glazed windows is 242mm.

In the case of DG construction, minimum frame sized vary according to frame proportion. 285mm x 480mm and 400mx400mm are typical. Consult Anglia Fixing for advice.

It is recommended that a template is produced for curved and radius windows (for refurbishment).

A range of brochure and specification sheets relating to the Homelight range may be downloaded from our Brochures page.

Back to Top