Comar 7 Aluminium Door Systems

Aluminium Products

Comar 7 Aluminium Door Systems

  • One of the most extensive range of commercial door configurations available to the market.
  • The range includes:
    • Swing Doors
    • Pivot Doors
    • Sliding Doors
    • Sliding/Folding Doors
    • Rebated Doors
    • Vehicle Access Doors
  • Full integration with Comar 2 window walling, Comar 5 window systems and Comar 6 curtain walling.
  • Special profiles allow the doors to be hung on transom closers directly onto Comar 2 window walling and Comar 6 curtain walling.
  • Glazing from 4mm to 40mm thickness.
  • Multiple brush seals ensure excellent weather tightness.
  • Tested to BS 6375 passed required 600 Pascal pressure differential/water penetration test. Pressure equalisation increased to 1200 Pascal's with 'no leakage'.
  • Construction:
    • Bolted & Screwed
    • Externally Bolted
    • Tie Rod
    • Glued & Pinned
  • A wide range of thresholds for applications including disabled access, drained and rebated doors.
  • Single door leaf sizes can be manufactured up to 1200mm wide and 2300mm high. Dependent on the size and configuration larger or smaller sizes can be achieved, please contact Comar's Technical Department for project-by-project advice.
  • Comar 7 conforms to relevant industry standards, such as BS 7950 and, where applicable, PAS 24.
  • Comar 7 sliding doors with door beams provide an automatic door solution.
  • A variety of automatic door beams accept most major manufacturers bolt-on automatic door gearing.
  • Automatic door guide rail channels keep the door in alignment with double brush seals that increase weather performance.

Back to Top